Skip to content

Getting Started

This guide covers choosing your connection mode, and understanding kayers of URX Core75.

Connection Switch

On the back of the keyboard, you will find the connection mode switch:

    [ BT  OFF  2.4G ]
  • BT (Left): Bluetooth Mode
  • OFF (Center): Wired USB C Mode
  • 2.4G (Right): 2.4GHz Wireless Mode

Windows and macOS Layout Toggle

  • Press FN + S to toggle the layout between Windows and macOS.
  • Blink Indication: The Caps Lock LED will blink in Yellow to confirm:
    • 3 times for macOS Layout (Layer 2 active).
    • 1 time for Windows Layout (Layer 0 active).

Understanding Keyboard Layers

The URX Core75 relies on function layers to pack a full keyboard's worth of features into a compact 75% form factor. Think of a layer like a shift key, but for the entire keyboard. The firmware uses 4 distinct layers (numbered 0 through 3) to handle both Windows and macOS layouts seamlessly:

  • Layer 0 (Windows Base): The default primary layout used for everyday typing on Windows.
  • Layer 1 (Windows Function): Accessed by holding the FN key while in Windows mode. Contains media controls, RGB settings, wireless toggles, and standard F-keys.
  • Layer 2 (macOS Base): The primary layout active when toggled into macOS mode (automatically swaps the physical positions of the Alt and Windows/Command keys to match Apple keyboards).
  • Layer 3 (macOS Function): Accessed by holding the FN key while in macOS mode. Contains Mac-specific F-row media and brightness controls.

You can fully customize the keymaps for all four layers using URX HUB or VIA.

Tip

To completely understand and utilize layers, you can read the proper documentation at https://docs.qmk.fm/feature_layers

Connection Modes Setup

1 Wired USB C Mode

  1. Set the Connection Switch to OFF (Center).
  2. Connect the included USB-C cable to the keyboard's Type-C port and your computer.
  3. You can also manually switch to USB mode by pressing FN + T (the T key will glow White to confirm). If no USB cable is connected, the T key will blink Red to indicate failure.

2 2.4GHz Wireless Mode

  1. Remove the 2.4GHz USB receiver (dongle) from the storage slot on the bottom of the keyboard.
  2. Plug the receiver into a USB-A port on your computer.
  3. Set the Connection Switch to 2.4G (Right) or BT (Left).
  4. Press FN + R to switch the active mode to 2.4GHz. The R key will light up Green to confirm.
  5. Pairing: To pair the receiver, press and hold FN + R for 3 seconds. The R key LED will flash green rapidly while pairing.

Warning

If the physical switch is in the OFF (Center) position, pressing FN + R will flash the R key Red and block the switch.

3 Bluetooth Multi Device Mode

The Core75 can pair with up to three devices simultaneously and switch between them using hotkeys.

Step by Step Syncing

  1. Set the Connection Switch to BT (Left) or 2.4G (Right).
  2. Press and hold FN + Q, FN + W, or FN + E for 3 seconds (for Bluetooth Channels 1, 2, and 3, respectively).
  3. The indicator LED under the matching key (Q, W, or E) will flash Blue rapidly, indicating the keyboard is in pairing mode.
  4. Open the Bluetooth settings on your host device (computer, phone, or tablet) and search for devices.
  5. Select URX Core75-1 (Channel 1), URX Core75-2 (Channel 2), or URX Core75-3 (Channel 3).
  6. The LED will turn solid Blue for 2.4 seconds and then return to the normal backlight effect, indicating successful pairing.

Switching Between Paired Devices

Simply short-press FN + Q, FN + W, or FN + E. The corresponding key LED will light up Blue for 1 second, and the connection will swap within 1-2 seconds.

Warning

If the physical switch is in the OFF (Center) position, pressing FN + Q, W, or E will flash the corresponding key Red and block the switch.